VM1000B series high performance general purpose AC drive

VM1000B series is a new high-performance open-loop vector general purpose AC drive. It can improve stability and reliability through technical upgrades and product optimization, to cope with various complex applications.
Product features
High performance vector control technology
Support speed mode and torque mode
Low speed with high torque output
Compact size, convenient to install
Independent air duct design, more environmental adaptability
High quality conformal coatings for better protection performance
Optimized PID function
Parameter copy function
CE certificate
6K EFT test
4K ESD test
Product parameters
Control performance Input & Output Display & key operations Application environment
Control mode: Sensorless vector control(SVC); V/F control
Startup torque: 0.5Hz/150%; 0.5Hz/100%
Speed range: -1.1; 1:50
Speed stability accuracy: ±0.5%; ±1%
Carrier frequency: 0.5kHz ~ 16kHz; the carrier frequency is automatically adjusted based on the load features.
Overload capacity: G type: 60s for 150% of the rated current, 1s for 180% of the rated current; P type: 60s for 120% of the rated current, 1s for 150% of the rated current.
Torque boost: Fixed boost; Customized boost 0.1% ~ 30.0%.
Running command source: Three command source:operation panel; control terminals; serial communication port; You can perform switchover between these sources in various ways.
Frequency source: There are 10 frequency sources in total, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting; You can perform switchover between these sources in various ways.
Auxiliary frequency source: There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis.
Input terminal: ◆ 6 digital input terminals (DI); ◆ 2 analog input terminals (AI)
Output terminal: ◆ 1 open-collector output terminal ; ◆ 2 relay output terminal; ◆ 2 analog output terminal
DC braking: Braking time: 0.0s ~ 100.0s; Braking action current value: 0.0% ~ 100.0%
V/F curve: Three modes: straight-line V/F curve, multi-point V/F curve, square V/F curve.
Ramp mode: Straight-line ramp, S-curve ramp; Four kinds of acceleration/deceleration time with the range of 0.0-6500.0s.
Simple PLC/Multiple speeds: It implements up to 16 speeds via the simple PLC function or combination of DI terminal states.
Built-in PID: It realizes process-controlled closed loop control system easily.
AVR function: It can keep constant output voltage automatically when the mains voltage changes.
Overvoltage/Overcurrent stall control: The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage and overcurrent.
Rapid current limit: It helps to avoid frequent overcurrent faults of the AC Drive.
Torque limit and control: It can limit the torque automatically and prevent frequent over current tripping during the running process.
Timing control: Timing control function: time range: 0h ~ 65535h
Protection mode: Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection and so on.
Application case
Resource download
File NameResource TypeBelonged productsOptions
VM1000B AC Drive User Manual V01 User's instructions VM1000B series high performance general purpose AC driveDownload

EMAIL:sales@saj-electric.com
ADD:SAJ Innovation Park, No.9, Lizhishan Road, Science City, Guangzhou High-tech Zone, Guangdong, P.R.China.

Copyright © 2018 GUANGZHOU SANJING ELECTRIC CO., LTD. All Rights Reserved 粤ICP备17052067号-1